|
|
Key Functions of a PondSweep Skimmer:
- Skimming surface debris before it can sink
- Disguises the pump, plumbing, filter mats and net outside the pond, improving aesthetics and simplifying maintenance
- Biologically filtering the pond water.
- Acts as a pre-filter for separate biological filters
- Collects sinking debris and heavy ammonia with the use of an optional bottom drain
|
|
|
|
|
|
The PS 301P is ideal for smaller ponds up
to 300 sq. ft. With 500-3000 GPH flow rates you can achieve excellent skimming. Perfect for smaller ponds or used in multiple locations on larger ponds. Constructed of HD
polyethylene. Optional features: Tie your pond’s bottom drain in before the filter mats to keep the bottom clean too. You can also get a simulated rock lid to disguise the
installation as well as fine filter mats to “super” clean the water before your filter or waterfall! Overall size: 20.5” L X 6” W X 19” H Includes: the above skimmer (vault, tray,
bellows, retention frame, and 1 filter mat, debris/leaf net) Lid not included |
|
|
|
|
|
|
|
|
|
|
The PS 701 is also available in MD polyethylene, it is a bit
lighter construction, compared to the PS 702F, which helps lower the cost. You get all of the same quality features features as the PS702F at a fraction of
the cost! Flow range: 1000-5000 GPH Optional features: Tie your pond’s bottom drain in before the filter mats to keep the bottom clean too. You can also get a
simulated rock lid to disguise the installation as well as fine filter mats to “super” clean the water before your filter or waterfall! Overall size: 22” L X 16” W X 22.5” H Includes: the
above skimmer (vault, tray, bellows, retention frame, and 1 filter mat, debris/leaf net) Lid not included |
|
|
|
|
|
|
|
|
|
|
|
|
|
The PS 301F is ideal for smaller ponds up to
300 sq. ft. With 500-3000 GPH flow rates you can achieve excellent skimming. Perfect for smaller ponds or used in multiple locations on larger ponds. Constructed
of fiberglass. Optional features: Tie your pond’s bottom drain in before the filter mats to keep the bottom clean too. You can also get a simulated rock lid to disguise the
installation as well as fine filter mats to “super” clean the water before your filter or waterfall! Overall size: 20.5” L X 6” W X 19” H Includes: the
above skimmer (vault, tray, bellows, retention frame, and 1 filter mat, debris/leaf net) Lid not included |
|
|
|
|
|
|
The PS 702F is new for 2001 and is based off
earlier models, PS 700, PS 701. It has been designed to skim a pond 700 sq. ft., using 1000-5000 GPH flow rates. These skimmers use a “filter mat holder” (see diagram on right) which allows you to
remove the filter mats with one hand for easier cleaning! The Units also have a bellows on the water intake to allow you to shut the water off when cleaning the system. Optional features: Tie your pond’s
bottom drain in before the filter mats to keep the bottom clan too. You can also get a simulated rock lid to disguise the installation as well as fine
filter mats to “super” clean the water before your filter or waterfall! See the items listed below. Overall size: 16” W X 22.5” H X 22” D Includes:
the above skimmer (vault, tray, bellows, retention frame, and 1 filter mat, debris/leaf net) |
|
|
|
|
|
|
|
|
|
|
PondSweep PS1200F $623.99
|
|
|
)The PS 1200F is a totally new model for 2001
and is designed to skim a pond of 1200 sq. ft., using 6000-12000 GPH flow rates. Same skimmer sub assembly and features as the as the PS701F, with a 16” wide weir instead of an 10” weir. Optional features: Tie your
pond’s bottom drain in before the filter mats to keep the bottom clean too. You can also get a simulated rock lid to disguise the installation as well as fine filter mats to
“super” clean the water before your filter or waterfall! See the items listed below. Overall size: 16” W X 22.5” H X 22” D Includes: the above
skimmer (vault, tray, bellows, retention frame, and 1 filter mat, debris/leaf net) |
|
|
|
PondSweep PS1500F $ 1169.99
|
|
|
The PS1500 is sufficient to skim ponds up to 1,500 sq. ft., using 4,000-20,
000 GPH flow rates.
Supplied with maintenance and installation instructions by the manufacturer. Uses a single vault filter mat which allows you to remove the filter mats with one
hand for easier cleaning! Also has a welded aluminum brace to minimize distortion during backfilling. It also has a bellows on the 16” water intake to allow you to
shut the water off when cleaning the system.
Optional features: Tie your pond’s bottom drain in before the filter mats to keep the bottom clean too. Overall size: 43” L X 25” W X 31” H Includes: the above
skimmer (vault, tray, bellows, liner retention frame, fiberglass cover, and 1 filter mat, debris/leaf net) (Ships motor freight)
|
|
|
|
|
Looking for accessories for the PondSweep Skimmers? The manufacturer offers a whole host of add-ons and accessories for decoration, filtering, replacement mats, etc.
|
|
|
|
|
Call 1-888-551-4343 for quotes on all installations, service, maintenance, ordering, and consulting
|
|